降低材料尺寸的机器也会磨损研磨元件. 总的来说, 你研磨的材料越有磨蚀性, the more quickly the internal parts wear. To ensure efficient operation and longevity of your Hammer mill, it’s crucial to regularly inspect and replace its wear parts.
这些组件包括锤子, 杆, 屏幕, 轴承, 耐磨板. 在本指南中, we will walk you through the steps of replacing your screens or grates to ensure your hammer mill continues to operate efficiently.
更换筛网或格栅
NOTE: This procedure requires two people to perform Step 10.
- Switch off the main power supply breaker.
- Secure the main switch using your site’s OSHA-approved lockout/tagout procedure.
- Open the mill hood.
- Use the handle to pull out the Rear Screen
- Remove the handle from the rear screen so that you can attach it to the new screen.
- Unbolt the front cover plate.
- Unfasten bolts for the front screen.
- Remove the front screen.
- 插入新的筛网并尽可能向前推，以便第二操作员能接触到它.
- 在磨机的前端, 第二操作员向上拉起筛网，并将固定角铁螺栓拧紧到位.
- 更换前盖板.
- 拧紧螺栓.
- 将手柄固定到新的后筛网上.
- 放置后筛网.
- 确保前筛网的指板与后筛网的指板啮合.
- 关闭磨机罩.