任何已移動或旋轉部件的機器需要日常的維護，確保其執行在最優容量. 這是特別真實的大小減少設備已磨將隨著時間的推移穿的元素. Schutte Hammermill equipment is very ruggedly constructed and with proper routine maintenance will remain in service for many years to come. 要實現這一目標, 我們建議所有的磨損部件的定期檢查.
定期檢查和更換是必要元件將穿. 為了避免代價高昂的停機, 我們建議，每個以下元件的一套保存在手邊.
Inspecting and replacing wear parts:
錘子
Important to Know:
- 取決於應用程式, 錘子將 2 路或 4 路可逆, 該值指示可能更換前旋轉的圈數.
- 錘子應該旋轉時切削刃是圓潤和這台機器不是在最高效率.
- 在工廠平衡集改總是到錘.
當替換:
- 當兩個全切割邊緣圓形的取代錘子.
- Replace hammers when there is a noticeable imbalance of hammer edge wear on any (or several) individual rows.
錘杆
Important to Know
- 作為一種最佳做法, 錘杆應檢查每次錘是旋轉或替換.
當替換
- 一旦他們成為槽取代錘杆.
- Replace hammer rods if they exhibit any taper wear near end caps, lock nuts or other affixing device.
螢幕 & 酒吧爐排
Important to Know
- 螢幕, 或欄格柵, 是在確定成品的細微性的關鍵因素.
當替換
- Replace screens when the perforations become elongated or when there is a hole larger than any two perforations (螢幕)
- 或酒吧邊緣變為圓角 (爐排).
耐磨板
Important to Know
- Wear plates are commonly used on equipment processing hard and/or abrasive materials. 這些可更換的元件保護軋機機架, 延長機器使用壽命.
當替換
- Replace wear plate when they show signs of thinning. Earliest signs of thinning will be seen around the bolt heads. It is critical that the plates be replaced prior to the wear-induced release of any bolts.
軸承
Important to Know
- 軸承承受的荷載，轉子和隨著時間的推移，可以磨損. 它被建議被替換成對.
當替換 (or otherwise perform maintenance)
- 更換軸承，如果他們給出過多的熱量,
- 外環開始旋轉,
- 軸承振動在其屋內的跡象,
- 如果軸承發出不尋常的哀鳴或尖叫